Drywall Mounting Kit

This hardware kit lets you mount your TV wall mount into the steel studs or drywall common in new construction. The kit can be used in commercial locations such as office buildings, restaurants, and warehouses. The anchors are designed to fit through the holes of standard steel studs, making installation simple. Perfect for Condos with Metal studs wall. The only solution which works in condo walls. This kits lets your mount on a Low profile fixed or tilt TV mount on plaster and lath or drywall without studs. Ensure your TV's is below 60 lbs and you use at least 4 toggle bolts. 1/2 inch titanium drill bit included to drill through drywall and metal studs 1/4-20 Screw with length of 2" and washers are included in this kit Instruction manual is included For tilting or Fixed wall mounts, these anchors can be used on 1/2 drywall, plaster and lath and ensure the loads does not exceed 70lbs. For TV's heavier then 60lbs the toggle bolts have to go through metal studs. Do not exceed loads 100lbs without consulting a professional Installer. For articulating brackets installed on metal stud using this kit, The toggle bolts have to be inserted through metal studs and load should not exceed 60lbs. Use minimum of 4 bolts The only kit for installation of TVs on walls in Metal studs or when you cannot find a stud on a wall. EASY to use Wall mounting solution for metal/steel studs walls and MOST TYPES of WALLS when mounting on a STUD is NOT and OPTION Included in the kit is ✔ 4 PIECES of ¼-20 SNAPTOGGLE hollow wall anchors ✔ 4 PEICES of ¼-20 x 2’’ screws ✔ ONE TITANIUM COATED HEX SHANK ½’’ Drill Bit worth $20 ✔ 4 PIECES of ¼’’ washer ✔ ONE ROLL of Electrical Tape BUY NOW and make the most of your living or working space by mounting your TV to the wall for convenient and comfortable viewing. This product can also used for mounting when a stud is not available. The provided revolutionary toggle bolts can hold upto 80lbs on 1/2 drywall. ✔They make smaller holes and are 4x faster to install then wing bolts, wing toggles and most other drywall anchors ✔Pre-installs without the bolt to make handling of fixture easier. ✔Reusable in the same hole – remove the bolt without losing the anchor. ✔New ergonomic design – fingers grip straps more naturally and more easily with no slipping METAL/STEEL STUD WALL MOUNTING KIT. Complete mouting kit to facilitates secure & easy installation of TVs or other objects on metal/steel studs or drywall. Metal studs are common in condos, apartments and commercial construction. STUD NOT REQUIRED. Can support upto 100lbs on drywall.STRONGEST BOLT AVAILABLE(MADE IN USA) The 4 Pieces of SNAPTOGLLER TOGGLE BOLTS provided can be used on Gypsum board, Drywall, Tile over drywall, Plasterboard, Composite panels, Cement board, Greenboard, Plaster, Stucco. COMPLETE KIT – One 1/2" hex socket titanium drill bit, 4pcs of ¼ -20 UL rated hollow wall toggle anchors, 4pcs of ¼-20 x 2’’ screws, 4pcs of ¼’’ washer, Electrical tape to mark positions of items you are mounting. NO trips to home depot or lowes. OTHER MOUNTING USE – Wall Mounting of Shelves, Wall Mounting of Cabinets, Wall Mounting Bathroom Accessories, Wall Mounting Grab Bar, Mounting Vanity, Draperies, Curtain Rods, Blinds and Mirrors when studs are not an option. NEATLY LABELED PACKAGING & MANUAL– The components in this package is separated by different use, the instruction manual is also included Benefits of the Mounting Kit. Smallest drill hole for each bolt size—1/4" wing toggle needs 50% larger hole High strength—holds up to 2x the load of an old-fashioned wing toggle of same bolt size Reusable in same hole— remove the bolt without losing the anchor One-person installation— like having an extra pair of hands behind the wall Insulation pushed aside by metal channel Does NOT destroy wall or ceiling—plastic cap & metal channel centers bolt & prevents abrasion Other Users of the Condomounts drywall wall and metal stud mounting kit. These heavy duty drywall anchors are good for Mounting of heavy Shelves, Mounting of Kitchen Cabinet when no stud is available Mounting Bathroom Accessories, Mounting Mirrors Wall Mounting Flat Screen TVs (LCD and Plasma) on walls Wall Mounting Draperies, Curtain Rods, and Blinds Mounting of Samsung No Gap Wall mount when there are no studs Spring-wing anchors, are extremely difficult, time consuming and complicated to install. • It is impossible to use a screw gun for installation. • Spring-wing anchors can’t handle heavy or high stress loads. Their weakest point, the "pivot",holds the bulk of the load. • Spring-wing anchors require up to 50% larger holes than TOGGLER BRAND toggle bolts. • Many simple jobs with spring-wing anchors require two people—one person must hold the fixture in place while the other fiddles with the spring wing.