Call: 647-477-2280 Continuing Essential Services During Covid-19 Pandemic

Wall mounted TV Power Receptacle Bridge Kit – In Wall Power for TV mounted on wall with 2″ studs

/, Concealed Cables Solution kits, Metal Stud Mounting/Wall mounted TV Power Receptacle Bridge Kit – In Wall Power for TV mounted on wall with 2″ studs

Wall mounted TV Power Receptacle Bridge Kit – In Wall Power for TV mounted on wall with 2″ studs

$129.00 $89.00

Wall mounted TV Power Receptacle Bridge Kit – In Wall Power for TV mounted on wall with 2″ studs

Fits wall with depth less then 2″. In condos the wall stud is not 2″x4″ studs. Condos use a 2″ stud thus making the wall depth very low for inserting a standard old works box. This self install solution is a perfect solution to create a power bridge to your TV in condo walls or wall using 2×2.

In-wall Power and Cable Management Kit for Wall Mounted TV
Easiest to install
Everything you need to power your TV inside the wall quickly and easily.
Designed to simplify wiring behind wall mounted TVs.
Works with all TVs and wall mounts.
Works with all brands of TVs and all wall mount types.
Ideal for Samsung TV power cords with right-angle plugs.
Engineered to provide the easiest and safest electrical installation.
The only kit with Electrical Code compliant that dont need any connections
No clicking or identifying of wires required. Everything is pre-wired to power your TV.
No hard-wiring connections required.
Dual power outlet
6 feet power-supply cord supplied
Installation template provided – Done in 20 minutes
Easy to follow printed instructions.
Same size as standard wall plates you already have in your home.
No electrician or hard wiring required.
Neat and easy installation in less than 20 minutes.

This innovative patented In-Wall HDTV to relocate power behind your flat panel TV hanging on the wall.

The Duplex Receptacle is installed on the wall behind the Flat Panel and the IEC end is located below in the same stud bay. Plug the right angle IEC power cord into the power inlet and the other end into a remote surge protector or electrical receptacle nearby.

Easily relocate power behind the wall to your flat panel.
Cable is pre-wired and requires no electrical wiring by the installer.
Mounts to Recessed Low Voltage Brackets.

• Electrical Rating: 15 Amp, 125 Vac, 60Hz.
• Cable Type; NM-B, 14-2 AWG.
• UL 817, CSA#22.2#21
• NEC Code: 250.146(D), Isolated Receptacles.
• NEC Article 300.15 (E) Integral Enclosure and
NEC 334.40 (B) Devices of Insulating Material and
other NEC code requirements suitable for its intended
• Cable Type NM-B usage as defined in Article 334 of
the NEC.
• All Components are UL rated for its intended application.

Additional information

Weight 0.9 kg
Dimensions 8 × 10 × 3.5 cm
Condo Ready

Fits slim wall in Condos

7 reviews for Wall mounted TV Power Receptacle Bridge Kit – In Wall Power for TV mounted on wall with 2″ studs

  1. Jori Peneycad

    Perfect Product for concealing wires. Easy to install. looks very elegant

  2. Noami Burke

    The only product available for Twin walls. The rest of the power bridge will not work in walls with studs that are smaller that 2×4. This product is great and installation is done in matter of minutes.

  3. Josh Maldini

    You cant find a better power concealing kit for wall mounted TVs. Easy to install and works great for anywall. I looked around for solutions at everystore and could not find one. and they we mostly more than $100. This product works perfectly in accordance with electrical codes and does a great job.

  4. Matthew Hurly

    Comes with the template to mark the wall. Use a drywall saw, I recommend the Milwaukee Drywall saw. Cut the hole accordingly. Don’t forget to cut the hole after you have installed the TV bracket and mark the edges of the TV. Make sure it is positioned behind the TV and not beside. This way the plug is completely hidden. All the connections for this kit is already done. So all you need to do is to fish the wires from bottom of the wall to behind the TV. The pictures in this page do show the outcome, so please refer to it if you have a problem.

    My wall is very thin. All the power bridge & power cable hiding solutions for wall mounted TVs are elongated and will not fit in most walls except for a house build with 2×4 studs. This product is perfect for anywall, thin or thick.

  5. Nicole Joanne

    Easy install. No brainer. Only product for condos. I suffered looking for one.

  6. Heather Pemberton

    This is a solid product. Installation cannot have been easier. Worked like a charm. Installation was easy.

    The only cons about this product is, it does not cater for the HDMI cables. You will need another hole to pass through the HDMI cables and use a grommet for that.

  7. Matthew Coleman

    Very good solution to install a power outlet behind the wall. No wiring required. All the power bridges available on amazon and home depot was to big e.g datacomm and powerbridge would not fit my condo wall. They were made for walls for a house.
    This product is narrow and will fit even though your wall is thin. there is two parts to this. One part is the power receptacle with two inputs and the other is an inverted power input. Installing these were very easy, cut the hole as per template and fish the piece from top to bottom. tighten.
    Check to make sure you have a straight path. Call them if you have problem. they are always willing to help.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

  • Sale!
    In wall Wire grommet for tv mounts , cable hider for wall mounted TVs
    Add to cart
  • Sale!
    Add to cart
$30 OFF Service
Free Fixed Mount
Next time
$20 OFF Service
$100 OFF Service
$50 OFF Service
Free SONOS Speaker
Free TILT Mount
$30 Amazon Gift Card
Free Swivel Mount
Sorry! Next Time
Get your chance to win amazing discounts!
Enter your email address and spin the wheel. This is your chance to win amazing discounts and special offers!
Our in-house rules:
  • One game per user.
  • Take a screen shot of your win.
Call Now Button